رقم الجزء F4040-38ID120D

Nonmetallic Tubing

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 2.62 and 3.537 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
f4040-38id120d
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
# blk FT
NIIN:
004561037

معلومات الجزء
Tubing can be used with leaded or unleaded gasolines with or without additives such as boron, tricresyl-phosphate or organic manganese. Should not be used to handle high concentrations of strong acids. Also strong alkalies tend to create case hardening and loss of flexibility

NSN
رقم المخزون الوطني:
4720-00-456-1037 4720004561037
TXT
وصف:
Nonmetallic Tubing
INC
INC
رمز اسم العنصر:
31934
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.375 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
10.0 degrees fahrenheit single response and 215.0 degrees fahrenheit single response
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
10.0 degrees fahrenheit and 215.0 degrees fahrenheit single response
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.499 inches
MRC:
The minimum inside bending radius formed without stressing or deformation of a flexible item.ACKH
Minimum Inside Bending Radius:
1.750 inches
MRC:
The hue or tint of the exterior of the item.ADJS
Exterior Color:
Yellow
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
15.0 pounds per square inch single response
MRC:
The type of protection provided by the outer covering.CRJM
Outer Covering Environmental Protection:
Fuel resistant and oil resistant
MRC:
The ultimate maximum vacuum,expressed in terms of absolute pressure,that may be produced by or applied to an item.CRSM
Vacuum In Torr:
177.8
MRC:
The condition of the item with respect to the texture of the inner surface.CRWL
Inside Surface Condition:
Smooth
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Flexible
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic tube
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Ethylene glycol single response and fuel/oil, hydrocarbon single response
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Ethylene glycol and fuel/oil, hydrocarbon single response

{lang[cimilar]} Nonmetallic Tubings

« Hose and Flexible Tubing {lang[catalog]}
قارن الآن»
واضح | أخفى