رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
fe124-0002-0001
معلومات الجزء
Lenth of hinge from end to end is 5.810 inches. Holes shall be countersunk.
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.056 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.230 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
3
MRC:
A measurement taken at right angles to the length of the body,in distinction from thickness.ADAT
Body Width:
Between 1.040 inches and 1.140 inches
MRC:
A measurement of the smallest dimension of a plate,in distinction from length or width.ADEB
Plate Thickness:
0.060 inches
MRC:
The means of attaching the item.ADJH
Mounting Method:
Unthreaded holes
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Ac130
MRC:
An indication of whether or not a reversible feature is included.AJNC
Reversible Feature:
Not included
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the pin tip.AKEV
Pin Tip Style:
Oval head
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the staple.AKEY
Staple Style:
Safety adjustable
Pin Center To Body Edge Distance:
Between 0.520 inches and 0.570 inches
MRC:
Indicates the type of cylindrical projection through which an axis or pin passes.AKNB
Knuckle Type:
Friction
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, federal standard 66, aisi 302, 303, or 305/sae 30302, 30303 or 30305
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Zinc, astm a153
MRC:
The distance along the plate transverse to the staple.CJQR
Err Default:
Err default
MRC:
The number of mounting holes provided in the plate.CJQT
Err Default:
Err default
MRC:
A measurement from the bottom to the top of a staple,in distinction from depth.CJQW
Err Default:
Err default
MRC:
A measurement taken at right angles to the length of the staple,in distinction from thickness.CJQX
Err Default:
Err default
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Strap
