رقم الجزء FFS107TYPEASTYLE1S

Tapping Screw
وصف

Screw

توافر المخزون  رموز حالة المنتج

رقم الجزء ffs107typeastyle1s في المخزون بالكميات والشروط التالية.

  • NS: 15
  • NE: 23

ملاحظة: تم آخر تحديث لتوفر هذا المنتج 12/06/2022 وربما تغيرت منذ ذلك الحين. اطلب عرض أسعار للأسعار المحدثة والتوافر.

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 0.5 and 0.675 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
ffs107typeastyle1s
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
25 EA
NIIN:
000143189
NSN
رقم المخزون الوطني:
5305-00-014-3189 5305000143189
TXT
وصف:
Tapping Screw
INC
INC
رمز اسم العنصر:
41756
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
0.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Round
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
Between 0.287 inches and 0.309 inches
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.107 inches and 0.120 inches
MRC:
None.AAUK
Spline Width:
0.050 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.ABQZ
Internal Drive Style:
Slot
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Casehardened
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of a nonmachine thread.CRGF
Nonmachine Thread Style:
Gimlet point (type a, ab or ba)
MRC:
The length of a straight line which passes through the center of the nonmachine threaded portion,and terminates at the circumference.CTYF
Nonmachine Thread Diameter:
0.164 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium or zinc
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81348-ff-s-107 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).

{lang[cimilar]} Tapping Screws

« Screws {lang[catalog]}
قارن الآن»
واضح | أخفى