رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Hydraulic hose
TXT
وصف:
Nonmetallic Hose
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.312 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-40.0 degrees celsius and 100.0 degrees celsius single response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the inner conveying tube.ADJL
Inner Conveying Tube Style:
Plain
MRC:
The hue or tint of the exterior of the item.ADJS
Exterior Color:
Black
MRC:
The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.CQBD
Burst Test Pressure:
20000.0 pounds per square inch single response
MRC:
The material and formation identifying the structural characteristic/s/ of the item and location.CQCS
Layer Composition And Location:
1st layer molded rubber, nitrile and 2nd layer braided steel wire and 3rd layer molded rubber, nitrile and 4th layer braided steel wire and 5th layer rubber, synthetic
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
5000.0 pounds per square inch single response
MRC:
The type of protection provided by the outer covering.CRJM
Outer Covering Environmental Protection:
Oil resistant and ozone resistant
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
5.0 inches excluding end fittings
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic outside
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber tube
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Sae100r16 assn standard all material responses
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Air and fluid single response
