رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
h4320-218-4219
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
External locking flange
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
0.062 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.062 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.875 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
3.250 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
2.750 inches
Left Side Flange Thickness:
0.125 inches
Right Side Flange Thickness:
0.125 inches
Distance Between Flanges:
0.625 inches
End To Flange Distance:
0.188 inches
Internal Flange Width:
0.375 inches
Center Flange Thickness:
0.500 inches
Smallest External Anchor Flange Radius:
1.812 inches
Largest External Anchor Flange Radius:
1.625 inches
Distance Below Centerline:
0.062 inches
Distance From End:
0.188 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside right corner
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches all surfaces
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-c-390, alloy 910 federal specification single material response
