رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Coupling, inboard
MRC:
Refers to the location of the ends whether on the same centerline (concentric) or on different centerlines (eccentric).ACSP
Reducer Type:
Concentric
MRC:
The maximum temperature at which the item is rated to operate for an extended period of time.AEHZ
Maximum Operating Temp:
100.0 degrees fahrenheit single response
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Los angeles class ssn (688)
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Grooved inside (tube) all ends
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Unthreaded internal tube all ends
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
1050.0 pounds per square inch single response
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
1.250 inches all ends
MRC:
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.CWFD
Outside Diameter Tube Accommodated:
0.750 inches 2nd end
MRC:
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.CWFD
Outside Diameter Tube Accommodated:
0.810 inches 1st end
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
2.335 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Nha reverse osmosis pressure vessel; 1st end id 0.812-0.813 in x 0.50 in long, 1st end o-ring groove id 1.053-1.055 in, second end id 0.752-0.753 in x 0.50 in long, second end o-ring groove id 0.990-0.992 in; center section id 0.88 in.
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 715
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-c-15726 aly-c71500 form-rod tem-060 military specification single material response
