رقم الجزء HS4103-12D-5.5

Panel Fastener Screw

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards
رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
hs4103-12d-5.5
تجريد:
No
صلاحيه:
وحدة القياس:
NIIN:
015066573

معلومات الجزء
Screw, captive

NSN
رقم المخزون الوطني:
5305-01-506-6573 5305015066573
TXT
وصف:
Panel Fastener Screw
INC
INC
رمز اسم العنصر:
19665
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.281 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
0.847 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Hexagon
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Apache attack helicopter
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.250 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
28
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
3500 pounds per square inch
MRC:
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.CQHQ
Minimum Yield Strength:
4300 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Material screw alloy steel 8740, per ams 6322 or equivalent, sleeve cres 304, per ams-qq-s-763; heat treatment screw harness rc 38-41, sleeve none; finish screw cadmium plate per ams qq-p-416, type ii, class 2, sleeve cadmium plate per ams-qq-p-416, type ii, class 2; thread per mil-s-8879; driver size 0.250 inch; shoulder 0.193 diameter porm 0.003; head 0.475 inch dia; head cross 0.168, width 0.281, hex 0.181 inch; grip thickness 0.188-0.250 inch
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf

{lang[cimilar]} Panel Fastener Screws

« Screws {lang[catalog]}
قارن الآن»
واضح | أخفى