رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Outer jacet is brushed stainless steel (type 304l); unit is factory assembled, foam insulated (polyurethane foam), jacketed, wired, and tested; power rating is 7.3 kw; full load amperage is 8.8 amps; tank test pressure is 225 psi; thermostat temperature range is 0-200 degrees f; hi-limit temp setting is 200 degrees f fixed; relief valve rating is 210 degrees f, 150 psi
TXT
وصف:
Electric Water Heater
MRC:
The maximum pressure at which an item is designed to operate.AAJJ
Maximum Operating Pressure:
150.0 pounds per square inch
MRC:
Indicates the type of heating unit which imparts heat.ABAL
Heating Element Type:
Any acceptable
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
21.000 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
19.750 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
13.000 inches
MRC:
Indicates the type of switch included in the item.AEEA
Switch Type:
Single throw
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Dishwasher
MRC:
An indication of whether or not an insulated feature is included.AHGR
Insulated Feature:
Included
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.AKYN
Furnished Items And Quantity:
Magnetic contactor 1 (c25dnd315b); digital display electronic temperature controller 1 (td1000); control module 1 (t1000) which is comprised the following: immersion copper elements, immersion safety hi-temperature cut out with manual reset, low water cut out, leak detection sensor, on/off switch; the following items are shipped loose with the item: asme rated combination temperature and pressure relief valve 1 (100xl.75 150lb), brass pressure reducing valve with built-in bypass 1 (36a-304-02), temperature/pressure gauge 2 (t405), nickel plate steel legs 4 (ae61-4002-cxx) -- all of the above items are included in this this order but can be ordered individually as needed
MRC:
An indication of whether or not an attachment device is included.ALHG
Attachment Device:
Included
MRC:
The rated heating capacity of the item per hour.AMHR
Heating Capacity Per Hour:
57.0 gallons
MRC:
The number of degrees the temperature rises per hour.AMHX
Tempurature Rise Per Hour:
50.0 degrees fahrenheit
MRC:
An indication of whether or not a thermostatic switch is included.AMJX
Thermostatic Switch:
Included
MRC:
Indicates the capacity of the tank.AMKA
Tank Capacity:
6.0 gallons
MRC:
Designates the thread diameter,series/type,and number of threads per measurement scale of the water inlet connection.AMLL
Water Inlet Connection Thread Size And Series/type Designator:
/4-14 npt
MRC:
Designates the thread diameter,series/type,and number of threads per measurement scale of the water outlet connection.AMLM
Water Outlet Connection Thread Size And Series/type Designator:
/4-14 npt
MRC:
The number of water inlet connections.AMLQ
Water Inlet Connection Quantity:
1
MRC:
The number of water outlet connections.AMLR
Water Outlet Connection Quantity:
1
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, corrosion resisting
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
