رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
je-1258x8cres316
معلومات الجزء
Quick acting access cover for nwt duct
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Recess, same shape as the periphery
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
8.750 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.063 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
8.750 inches
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
7.750 inches
Distance Between Holes Along Length:
1.063 inches
Distance Between Holes Along Width:
4.710 inches
Distance From First Hole Centerline To End Along Length:
1.250 inches
Distance From First Hole Centerline To End Along Width:
1.645 inches
First Recess Inside Height:
0.125 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.063 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Hinge
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Ventilation access covers
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Uninsulated; larger holes are farther from outer edge and are 1.563 in. In diameter, smaller holes are 0.875 in. In diameter
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 316
