رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
kh43616-1216-082
معلومات الجزء
Per certification data sheet (cd kh43616-1216) this valve is to be furnished as a complete assembly to include a hydraulic motor operator and an internal position switch. Operators shall be complete with a hydraulic fluid motor, gearing, handwheel for local manual operation and an internal valve position indicator switch. Hydraulic motor iaw mil-p-18111a and hydraulic fluid iaw mil-h-17672d symbol 2110th.
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
W/s designator nimitz class cvn
MRC:
The electrical current rating,expressed in amperes.AMPS
Current Rating In Amps:
10.000
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Hydraulic or manual
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Wafer
MRC:
The pressure required to actuate the power driven unit.CQCN
Power Drive Operating Pressure:
750.0 pounds per square inch
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
115.0 ac
MRC:
Designates the size of the butterfly valve.CWZR
Butterfly Valve Size:
8.000 inches
MRC:
The number of alternating current phases.FAAZ
Phase:
Single
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 958 body
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy seat and chromium seat
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy stem
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Graphite packing
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy flow control device and nickel flow control device
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-b-24480 military specification single material response body
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-286 federal specification single material response stem
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Water, salt single response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
A1 straight thru
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
The hydraulic motor oil ports fitted with a 1 inch ips union head piece per 803-1385859. A straight thread and o-ring seal used for connection of union head to the motor housing. Mating union nut and tail piece to be furnished by shipbuilder
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
Mil-std-167-1, 63600-98-nti-vo1, rev 2 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And mil-s-901c, 63600-98-nti-sr1, rev 3; bot approved and extension by supshipnn va ltr 9072-234-cvn68-253g/0986 dated 28 oct 99 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.TMQY
Furnished Items And Quantity:
1 handwheel and 1 indicator
