رقم الجزء L22077P02

Plate Spacer

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 248.42 and 335.367 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
l22077p02
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
010679661

معلومات الجزء
Otwo holes 0.468 in. Min to 0.475 in. Maximum dia, located 2.350 in. From center along the width at one side and one hole located 3.500 in. From center of hole to bottom edge and 0.650 in. From center of hole to one side

NSN
رقم المخزون الوطني:
5365-01-067-9661 5365010679661
TXT
وصف:
Plate Spacer
INC
INC
رمز اسم العنصر:
26979
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.810 inches and 0.880 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 8.970 inches and 9.030 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 6.970 inches and 7.030 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
5.000 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
6.500 inches
MRC:
None.ADVD
Outside Edge To Bolt Hole Center Distance Along Width:
1.250 inches
MRC:
None.ADVE
Outside Edge To Bolt Hole Center Distance Along Length:
1.000 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-766 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular w/bolt holes

{lang[cimilar]} Plate Spacers

« Bushings, Rings, Shims and Spacers {lang[catalog]}
قارن الآن»
واضح | أخفى