رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Shaft has a spherical bottom holewhich is 0.3800 in. In diameter, and is 1.8800 in. Deep; it also has a chamfer that measures 0.0600 in. With a 45 degree angle; item used on b1b acft
TXT
وصف:
Rod End Plain Bearing
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.AAZF
Shank Style:
Externally threaded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.0300 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 1.0932 inches and 1.0937 inches
Outer Member Outside Diameter:
Between 0.7419 inches and 0.7500 inches
Bore Center To Shank End Distance:
3.0300 inches
Outer Member Width:
Between 0.4280 inches and 0.4320 inches
Inner Member Width:
Between 0.6670 inches and 0.6720 inches
Shank End To Shoulder Length:
2.0300 inches
Shank Thread Length:
2.0300 inches
MRC:
The length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AWDP
Thread Diameter:
0.750 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
20
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shouldered flange type
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjef
