رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Id offset 0.156 in. From center, left end 180deg 0.373 from end
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.0937 inches first
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.0720 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 0.5100 inches and 0.5200 inches
MRC:
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.AEPR
Flange Outside Diameter:
Between 1.3630 inches and 1.3640 inches
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
0.1300 inches
Right Internal Flange Hole Diameter:
Between 0.4995 inches and 0.5000 inches
Right Internal Flange Width:
0.1890 inches
End To Flange Distance:
Between 0.4580 inches and 0.4600 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered center flange outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Relief groove center flange left body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square center flange outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square center flange right body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside right corner
MRC:
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.CTJM
Antirotation/lubrication Type And Quantity:
1 hole
Left End Body Diameter:
Between 0.8600 inches and 0.8700 inches
Right End Body Diameter:
Between 0.6690 inches and 0.6700 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 630
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
21c-1 solid, external flange, internal flange one end
