رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
With 1/2 in. Diameter shaft on drive motors
TXT
وصف:
Lithographic Copying Camera
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
48.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
156.000 inches
MRC:
The installation for which the item is designed.AMQY
Installation Design:
Fixed
MRC:
The installation for which the item is designed.AMQY
Installation Design:
Mobile
MRC:
Indicates the type of camera.ASZP
Camera Type:
Darkroom
MRC:
The maximum ratio by which the item may be reduced.ASZR
Maximum Reduction Ratio:
1 to 0.33
MRC:
The maximum ratio by which the item may be enlarged.ASZS
Maximum Enlargement Ratio:
1 to 2.0
MRC:
The maximum ratio by which the item may be enlarged.ASZS
Maximum Enlargement Ratio:
1 to 3.0
MRC:
The minimum and maximum setting limits of the lens aperture.ASZT
Lens Aperture Setting Range:
+11.0/+90.0
MRC:
The minimum and maximum setting limits of the lens aperture.ASZT
Lens Aperture Setting Range:
+11.0 to 90.0
MRC:
Indicates the type of mount utilized to support the camera.ASZZ
Camera Mounting Type:
Fixed
MRC:
Indicates the type of film accommodation provided.ATAB
Film Accommodation Type:
Cut film
MRC:
A measurement taken at right angles to the length of the film,in distinction from thickness.ATAK
Film Width:
Between 4.00 inches and 24.00 inches
MRC:
The number of exposures the item will accommodate.ATAL
Exposure Quantity Accommodated:
1
MRC:
The means by which the item is focused.ATAM
Focus Method:
Lead screw
MRC:
Indicates the type of viewfinder provided.ATAP
Viewfinder Type:
Ground glass back
MRC:
The means by which the lens is mounted to an item.ATAS
Lens Mounting Method:
Board
MRC:
A measurement of the longest dimension of the film,in distinction from width.ATAW
Film Length:
Between 0.417 feet and 2.500 feet
MRC:
A measurement taken at right angles to the length of the negative,in distinction from thickness.ATBB
Negative Width:
Between 4.000 inches and 24.000 inches
MRC:
A measurement of the longest dimension of the negative,in distinction from width.ATBC
Negative Length:
Between 5.000 inches and 30.000 inches
MRC:
Indicates the type of film holder provided.ATDK
Film Holder Type:
Vacuum back
MRC:
Indicates the type of copy board provided.ATDL
Copy Board Type:
Vacuum
MRC:
The maximum measurement taken at right angles to the length of the copy board,in distinction from thickness.ATDP
Copy Board Maximum Width:
36.0 inches
MRC:
The maximum measurement of the longest dimension of the copy board,in distinction from width.ATDQ
Copy Board Maximum Length:
48.0 inches
MRC:
The type and amount of voltage for which the vacuum pump motor is designed.ATDR
Vacuum Pump Motor Voltage Rating:
115.0 alternating current
MRC:
The cycles per second (hertz) of alternating current for which the vacuum pump motor is designed.ATDT
Vacuum Pump Motor Current Frequency In Hertz:
60.0
MRC:
The structural design of the item.ATDY
Structural Design:
Bed supported mounted on torque tube
MRC:
The number of alternating current phases for which the vacuum pump motor is designed.ATDZ
Vacuum Pump Motor Phase:
Single
MRC:
The type and amount of voltage for which the illuminated copy board is designed.ATEA
Illuminated Copy Board Voltage Rating:
208.0 alternating current
MRC:
The cycles per second /hertz/ of alternating current for which the illuminated copy board is designed.ATEB
Illuminated Copy Board Current Frequency In Hertz:
60.0
MRC:
The maximum amount of power for which the illuminated copy board is designed,expressed in watts.ATEC
Illuminated Copy Board Wattage Rating:
Any acceptable
MRC:
The type and amount of voltage for which the focusing drive motor is designed.ATED
Focusing Drive Motor Voltage Rating:
208.0 alternating current
MRC:
The cycles per second (hertz) of alternating current for which the focusing drive motor is designed.ATEE
Err Default:
Err default
MRC:
The cycles per second (hertz) of alternating current for which the focusing drive motor is designed.ATEE
Focusing Drive Motor Current Frequency In Hertz:
60.0
MRC:
The number of alternating current phases for which the focusing drive motor is designed.ATEF
Err Default:
Err default
MRC:
The number of alternating current phases for which the focusing drive motor is designed.ATEF
Focusing Drive Motor Phase:
Single
MRC:
A measurement of the longest dimension from the center of a lens to the focal plane,in distinction from width.BKHF
Lens Focal Length:
19.000 inches and 24.000 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
72.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Horizontal lithographic
