رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Dust And Moisture Seal Boot
MRC:
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.ABFE
Hazardous Locations/environmental Protection:
Oiltight-nema type 11 and watertight-nema type 4 and weatherproof-nema type 3 and flame resistant and hydrostatic resistant and aromatic hydrocarbons resistant
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
7.860 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
6.350 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
5.500 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.184 inches and 0.190 inches
MRC:
The number of mounting devices used as a means of attaching the item.ACUP
Mounting Device Quantity:
1
MRC:
A measurement taken at right angles to the length of the base,in distinction from thickness.ACUU
Base Width:
4.000 inches
MRC:
The means by which the item is sealed.ACUW
Sealing Method:
Mechanical
MRC:
The means of attaching the item.AXGY
Mounting Method:
Plate
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the base.BGKB
Baselength:
6.360 inches
MRC:
The length of a straight line which passes through the center of the two surfaces of a circular opening,and terminates at the inside circumference.BGKC
Opening Inside Diameter:
Between 1.300 inches and 1.400 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nylon body
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-c-20696 type 2 class 3 military specification single material response body
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Rubber chloroprene body
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-20696 class 3 military specification single treatment response body
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Control stick, aircraft