رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Color, gray
TXT
وصف:
Nonmetallic Special Shaped Secti
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Hollow core, cushion seal
MRC:
The element,compound,or mixture of which the jacket is fabricated.AARR
Jacket Material:
Fabric, tricot
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
45.0 shore durometer a and 55.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
1000 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-65.0 degrees fahrenheit and 300.0 degrees fahrenheit
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.863 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.000 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Tear resistant and low temperature and high temperature
Inside Radius:
0.660 inches
Base Flange Thickness:
0.122 inches
MRC:
A measurement taken at right angles to the length of a base flange,in distinction from thickness.AJGQ
Base Flange Width:
0.625 inches
MRC:
A measurement of a straight line drawn from the center of a circle to any part of its circumference.AJGW
Outside Radius:
0.723 inches
First Slot/groove Width:
0.188 inches
First Fillet Radius:
0.032 inches
Second Fillet Radius:
0.032 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber
