رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 0.625 inches and 0.745 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 1.125 inches and 1.245 inches
Second Leg Width:
Between 0.720 inches and 0.780 inches
Second Leg End Width:
Between 0.365 inches and 0.385 inches
Second Leg Diameter:
0.365 inches
First Leg Hole Diameter:
Between 0.218 inches and 0.224 inches
Second Leg Hole Diameter:
Between 0.135 inches and 0.141 inches
Second Leg Distance Between Hole Centers Along Width:
Between 0.365 inches and 0.385 inches
Second Leg Distance From Edge To Hole Center Along Width:
Between 0.150 inches and 0.210 inches
Second Leg Distance From Edge To Hole Center Along Length:
Between 0.280 inches and 0.340 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.040 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.040 inches
First Leg Width:
Between 0.720 inches and 0.780 inches
First Leg End Width:
Between 0.365 inches and 0.385 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.350 inches and 0.410 inches
First Leg Distance From Edge To Hole Center Along Length:
Between 0.280 inches and 0.340 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square and tapered
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Square and tapered
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Two holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.HEAT
Heat Treatment:
Full hard
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-5059, comp 301, 1/4 hard military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
