رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Flexible Shaft Assembly
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b both ends
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand both ends
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.375 inches both ends
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
108.625 inches
MRC:
A measurement of the longest dimension of the tip,in distinction from width.AEDN
Tip Length:
0.375 inches second end
MRC:
A measurement of the longest dimension of the tip,in distinction from width.AEDN
Tip Length:
0.750 inches first end
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Vehicle, recovery m-88 series
MRC:
The element,compound,or mixture of which the core is fabricated.AJXJ
Core Material:
Any acceptable
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Unf second end
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Uns first end
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the core surface.AKMF
Core Surface Treatment:
Any acceptable
MRC:
The length of a straight line which passes through the center of the core,and terminates at the circumference.AKMH
Core Diameter:
Any acceptable
MRC:
Indicates the location of the thread on the item.APJC
Thread Location:
Internal both ends
MRC:
Indicates the type of end.APTD
End Type:
Round keyed first end
MRC:
Indicates the type of end.APTD
End Type:
Square male second end
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.750 inches second end
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
1.000 inches first end
MRC:
Indicates the type of end connection.AWZY
End Connection Type:
Threaded internal both ends
MRC:
The element,compound,or mixture of which the casing is fabricated,excluding any surface treatment.BJPS
Casing Material:
Plastic reinforced w/steel wire
MRC:
Indicates the type of facility utilized to assemble or disassemble the item.BPPL
Wrenching Facility Type:
Hexagon both ends
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
0.104 inches across flats second end
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
0.150 inches diameter first end
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the casing surface.CFRN
Casing Surface Treatment:
Any acceptable
MRC:
A measurement of the longest dimension of the casing between ferrules,in distinction from width.CFRP
Casing Length Between Ferrules:
Between 102.616 inches and 103.324 inches
MRC:
The length of a straight line which passes through the center of the casing,and terminates at the outside circumference.CFRQ
Casing Outside Diameter:
Between 0.300 inches and 0.500 inches
MRC:
Indicates the type of protective device included with the casing.CFRR
Casing Protective Device Type:
Plastic cover
MRC:
An indication of whether or not a swivel end(s) is provided.CFRT
Swivel End:
Not provided both ends
MRC:
Designates the overall size of the end dimensions of the item.CFRX
Overall End Size:
0.750 in. Hex by 0.562 in. H second end
MRC:
Designates the overall size of the end dimensions of the item.CFRX
Overall End Size:
1.000 in. Hex by 0.609 in. H first end
MRC:
An indication of whether or not a lubrication fitting(s) is provided.CFRY
Lubrication Fitting:
Not provided both ends
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the core.CFRZ
Corelength:
108.625 inches
MRC:
The direction in which the core is designed to rotate,when viewed axially,from the drive end.CFSB
Core Rotation Direction:
Clockwise
MRC:
An indication of whether or not the core(s) is removable.CFSL
Core Removability:
Removable
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
9 class and 1 type
