رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
m14g-2n1a-m2-01743
MRC:
The ability of an item to withstand a specified torque load without fracture.AAPL
Torque Load Rating:
222.0 inch-pounds
MRC:
A measurement of the longest dimension of a key,in distinction from width.AAST
Key Length:
1.500 inches
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Flange
MRC:
A measurement taken at right angles to the length of a key,in distinction from thickness.ABSF
Key Width:
Between 0.4375 inches and 0.4385 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.810 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
4
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
Between 1.748 inches and 1.750 inches
MRC:
The speed of the drive shaft required to produce the rated capacity of an item,expressed in revolutions per minute.AEQC
Operating Speed At Rated Capacity In Rpm:
2400.0
MRC:
Indicates the type of drive shaft by the physical configuration,condition,and the like of the shaft end.AJAB
Drive Shaft Type:
Keyed
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Clockwise and counterclockwise
MRC:
A measurement of the longest dimension the shaft extends from the item.ARQA
Shaft Protrusion Length:
Between 2.280 inches and 2.345 inches
MRC:
A measurement from the bottom to the top of a key,in distinction from depth.AXFE
Key Height:
Between 0.191 inches and 0.193 inches
MRC:
Indicates the displacement type.AXFP
Displacement Type:
Constant
MRC:
An indication of the constant displacement per revolution.AXFQ
Constant Displacement Per Revolution:
14.000 cubic inches
MRC:
The spacing in the arrangement of the mounting bolt holes.AZFG
Mounting Bolt Hole Spacing:
8.840 in by 8.840 in
