رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Sheet thickness 0.070/0.093; pre-cut length; 85 castles; color is lime green, color number 14553
TXT
وصف:
Nonmetallic Grommet
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
Between 0.155 inches and 0.180 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
Between 0.190 inches and 0.210 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.320 inches and 0.340 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.220 inches and 0.255 inches
Tab Width:
Between 0.057 inches and 0.072 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
C-17a
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the grommet.AGME
Grommet Style:
Edging
Width Between Tabs:
Between 0.057 inches and 0.072 inches
MRC:
Indicates the type of design used in constructing the grommet.AGMU
Grommet Construction Type:
Solid
Grommetlength:
Between 12.620 inches and 12.750 inches
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Green, federal standard 595, 34087
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel metallic parts
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5517 assn standard single material response metallic parts or ams 5903 assn standard single material response metallic parts or ams 5907 assn standard single material response metallic parts or ams 5310 assn standard single material response metallic parts