رقم الجزء M5423-06-01

Dust And Moisture Seal Boot
وصف

Nut

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 10.52 and 14.202 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
m5423-06-01
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
No qup EA
NIIN:
010413873
NSN
رقم المخزون الوطني:
5930-01-041-3873 5930010413873
TXT
وصف:
Dust And Moisture Seal Boot
INC
INC
رمز اسم العنصر:
19302
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.438 inches
MRC:
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.ABFE
Hazardous Locations/environmental Protection:
Oil resistant
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.844 inches
MRC:
The means by which the item is sealed.ACUW
Sealing Method:
Compound
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
0.875 inches
MRC:
The length of a straight line which passes through the center of a base,and terminates at the outside circumference.AGQD
Base Outside Diameter:
0.687 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Thread
MRC:
The length of a straight line which passes through the center of the two surfaces of a circular opening,and terminates at the inside circumference.BGKC
Opening Inside Diameter:
0.510 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.500 inches
MRC:
Indicates the location of the thread on the base.CSFT
Base Thread Location:
Internal
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone body
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-5847, type 25, class 3 military specification single material response body
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Closed end
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-423 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
B1349--5423-06-01 government standard

{lang[cimilar]} Dust And Moisture Seal Boots

« Switches {lang[catalog]}
قارن الآن»
واضح | أخفى