رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
.020 diameter holes for safety wires located around coupling ring, clamp, and at elbow.
TXT
وصف:
Electrical Connector Backshell
MRC:
The element, compound,or mixture from which the seal is fabricated.ABAH
Seal Material:
Rubber, silicone base
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.020 inches
MRC:
The angle the end/s/ or legs deviate from the centerline of the inlet end,expressed in degrees.ADMW
Body Angle In Deg:
90.0
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
An/swg-1 (v) 2
MRC:
The length of a straight line which passes through the center of the cable opening,and terminates at the circumference.AGTW
Cable Opening Diameter:
Between 1.437 inches and 1.840 inches
Distance From Centerline To Connector End:
Between 1.691 inches and 1.941 inches
Distance From Centerline To Cable End:
Between 4.183 inches and 4.307 inches
MRC:
The number of openings designed to accommodate a cable.AKRD
Cable Opening Quantity:
1
MRC:
Indicates the type of seal included with the item.AKRF
Seal Type:
Grommet and preformed packing
MRC:
A designation indicating the size by which the item is commercially known and/or identified.ALJP
Size Designation:
28
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
1 clamp assembly and 1 threaded coupling
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Nickel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle type w/clamp
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Nickel, electroless
