رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Port thds 1.5 mm linear pitch
TXT
وصف:
Hydraulic Brak Cylinder Assembly
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Iron, cast
MRC:
The provision/s/ for mounting the item.ABDR
Mounting Provision:
Unthreaded mounting holes
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
Not rated
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
3.750 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.812 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.875 inches
MRC:
The means by which the item is actuated.AFLW
Actuation Method:
Direct
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJFY
Seat Angle In Deg:
42.0
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting provision(s).BBBW
Mounting Provision Arrangement Style:
Two hole
MRC:
Indicates the type of reservoir provided.BMWH
Reservoir Type:
Remote
Straight Bore Inside Diameter:
0.875 inches
MRC:
Indicates the type of mounting and the location on the item.CLML
Mounting Type And Location:
Flange piston rod end
MRC:
The length of a straight line which passes through the center of the mounting facility,and terminates at the circumference.CLMQ
Mounting Facility Diameter:
0.360 inches
Center To Center Distance Between Mounting Provisions:
2.375 inches
MRC:
Indicates the location and number of ports on the item.CLMS
Port Location And Quantity:
1 cylinder head end
MRC:
Indicates the location and number of ports on the item.CLMS
Port Location And Quantity:
1 center section
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the port.CLMT
Port Style:
Gasket seal all ports
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the port.CLMT
Port Style:
Inverted flare single port
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the port.CLMW
Port Thread Series Designator:
Iso m
MRC:
The length of a straight line which passes through the center of the port and would bound the crest of an external thread or the root of an internal thread.CLMX
Port Thread Diameter:
10.0 millimeters
