رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
5 degrees 30 min bend in right end of flange, 0.400 in from aperture center line
TXT
وصف:
Bearing Retaining Plate
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Raised surface w/ aperture
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 0.7300 inches and 0.7500 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
2.0230 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.1693 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
0.4528 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
Vertical centerline
Distance Between Holes Along Width:
1.5830 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
0.1300 inches
MRC:
A measurement from the bottom to the top of a raised surface,in distinction from depth.CKSR
Raised Surface Height:
0.0600 inches
Distance From Horizontal Centerline To Center Of Lower Hole:
0.7300 inches
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Round, unthreaded
Outside Raised Surface Diameter:
0.5570 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 7075
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-200/11, t73 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Plastic polyurethane inner face as mounted
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-83286 military specification single treatment response inner face as mounted
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Offset
