رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Upright Drilling Machine
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Bench
MRC:
The rated power of the electric motor.ABYE
Electric Motor Power Rating:
0.500 horsepower
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
Indicates the type of head provided.AJGD
Head Type:
Sliding
MRC:
An indication of whether or not a treatment is included to produce a fungus resistant condition.AKSQ
Fungus Resistant Treatment:
Included
MRC:
An indication of whether or not shielding against radio interference is provided.ALBH
Radio Interference Shielding:
Provided
MRC:
An indication of whether or not a reversible rotation feature is included.ALYE
Rotation Reversibility Feature:
Included
MRC:
Indicates the type of feed provided.AQDD
Feed Type:
Hand
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
0.500
MRC:
The number of spindles provided.BCRH
Spindle Quantity:
1
MRC:
Indicates the type of main drive provided for turning,rotating,or positioning the mechanism.BNQL
Main Drive Type:
Electric motor
MRC:
The distance the spindle will travel.BNRL
Spindle Travel Distance:
4.000 inches
MRC:
A measurement of the longest dimension of the base working surface,in distinction from width.BNRW
Base Working Surface Length:
11.000 inches
MRC:
A measurement taken at right angles to the length of the base working surface,in distinction from thickness.BNRX
Base Working Surface Width:
11.000 inches
MRC:
The drilling capability/ies/ of the item.BNRY
Drilling Capability:
1/2 in. Drilling capacity in mild steel
MRC:
Indicates the type of column provided on the item.BNRZ
Column Type:
Round
MRC:
Designates the size of the drill chuck the item will accommodate.BNSC
Drill Chuck Size Accommodated:
1/2 in. Key
MRC:
The distance from the center of the spindle to the column.BNSD
Distance From Spindle Center To Column:
7.500 inches
MRC:
Indicates the type of base working surface provided on the item.BNSF
Base Working Surface Type:
Tee slotted
MRC:
The physical configuration of the base working surface.BNSG
Base Working Surface Shape:
Square
MRC:
Indicates the location of the item on which the base working surface is mounted.BNSL
Base Working Surface Mounting Location:
Base
MRC:
The maximum distance from the chuck or spindle nose to the base working surface.BNSM
Maximum Distance From Chuck/spindle Nose To Base Working Surface:
19.625 inches
MRC:
Indicates the type of upper working surface provided on the item.BNSN
Upper Working Surface Type:
Slotted
MRC:
The physical configuration of the upper working surface.BNSP
Upper Working Surface Shape:
Rectangular
MRC:
A measurement of the longest dimension of the upper working surface,in distinction from width.BNSS
Upper Working Surface Length:
12.000 inches
MRC:
A measurement taken at right angles to the length of the upper working surface,in distinction from thickness.BNST
Upper Working Surface Width:
10.000 inches
MRC:
An indication of whether or not an upper working surface adjustment feature is included.BNSW
Upper Working Surface Adjustment Feature:
Included
MRC:
The distance the upper working surface can be adjusted vertically.BNSX
Upper Working Surface Vertical Adjustment:
Any acceptable
MRC:
The swivel adjustment,expressed in degrees.BNSY
Swivel Adjustment In Deg:
Any acceptable
MRC:
The direction and number of degrees in which the angle of tilt can be adjusted.BNSZ
Tilt Adjustment Direction And Angle In Deg:
90.0 left
MRC:
The measured distance the head can be adjusted vertically.BPSX
Head Vertical Adjustment:
Any acceptable
MRC:
Indicates the type of spindle provided.BQLR
Spindle Type:
Solid male tapered for drill chuck
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
4
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+250.0/+1140.0
MRC:
Indicates the location of the item on which the upper working surface is mounted.BWJN
Upper Working Surface Mounting Location:
Column
MRC:
The maximum distance from the chuck or spindle nose to the upper working surface.BWJP
Maximum Distance From Chuck/spindle Nose To Upper Working Surface:
14.250 inches
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
230.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Single
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
1 type and a style and 1 size
