رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Flat disc flange
TXT
وصف:
Blind Pipe Flange
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
6.562 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
7.688 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.500 inches
MRC:
The industrial designation or term used to define the nominal diameter of pipe for which the item is designed.ACSU
Pipe Size For Which Designed:
4.000 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
8
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.562 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange section.AJEM
Flange Section Style:
Plain face (blind)
MRC:
The condition of the face seating surface of an item which contacts another surface.AKWE
Face Seating Surface Condition:
Machined
MRC:
The maximum pressure at which an item is rated to operate for each type of service with which an item may be used.CQCJ
Maximum Operating Pressure And Media For Which Designed:
100.0 pounds per square inch steam and 100.0 pounds per square inch gas and 100.0 pounds per square inch oil and 100.0 pounds per square inch water
MRC:
A rating which expresses the degree of heat or cold as applied to the operation,or limitation of operation,for each type of service with which an item may be used.CRWH
Maximum Operating Tempurature And Media For Which Designed:
425.0 degrees fahrenheit steam and 425.0 degrees fahrenheit gas and 425.0 degrees fahrenheit oil and 425.0 degrees fahrenheit water
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Bronze, sae ca922
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round, one bolt hole circle
