رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Drum capacity' 350.0 ft of 0.500 in wire rope
TXT
وصف:
Power Operated Drum Winch
MRC:
The number of prime movers incorporated in the unit.AAXH
Prime Mover Quantity:
1
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.ACSY
Furnished Items And Quantity:
1 wire rope
MRC:
The pressure required to actuate the power driven unit.ADQX
Power Drive Operating Pressure:
80.0 pounds per square inch gage
MRC:
Indicates the type of prime mover included with the unit.AKDJ
Prime Mover Type:
Pneumatic motor
MRC:
The means used to operate the item.APHE
Operation Method:
Power
MRC:
The distance between flanges on the drum,and the location on the item.ATWD
Drum Flange To Flange Distance And Location:
Any acceptable
MRC:
The length of a straight line which passes through the center of the drum,and terminates at the circumference,and its location on the item.ATWE
Drum Diameter And Location:
Any acceptable
MRC:
The length of a straight line which passes through the center of the drum flange,and terminates at the circumference,and its location on the item.ATWF
Drum Flange Diameter And Location:
Any acceptable
MRC:
The total load the item is capable of moving at selected speeds and the drum location.ATWN
Load Limit At Selected Speed And Drum Location:
2000.0 pounds single speed first drum
MRC:
The distance that the item will move per minute,per specific measurement scale.ATWP
Travel Rate Per Minute:
120.0 feet
MRC:
The means by which the braking action is applied.ATWS
Braking Method:
Manual
MRC:
Indicates the type of clutch provided.ATXA
Clutch Type:
Positive jaw, spline or friction
MRC:
The design on the drum surface.ATYH
Drum Surface Design:
Plain
MRC:
The means of cooling used to maintain the required operating temperature of the item.BFMF
Cooling Method:
Non ventilated
MRC:
The technical differentiating characteristic/s/ of an item of supply which depart/s/ from the text of a specification or a standard in that it represents a selection of characteristics stated in the specification or standard as being optional,or a variation from one or more of the stated characteristics,or an additional characteristic not stated in the specification or standard.ZZZW
Departure From Cited Document:
As differentiated by deletion of pawl and ratchet clause in par 3.8
