رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
As modificed by the material specification grade and tensile strength
TXT
وصف:
Nonmetallic Special Shaped Secti
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Hollow core, double flange
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
45.0 shore durometer a and 55.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
1200 pounds per square inch
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.179 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.453 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 49.750 inches and 50.250 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
0.078 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Oil resistant
Aperture Height:
0.094 inches
First Slot/groove Depth:
0.156 inches
First Slot/groove Width:
0.085 inches
First Corner Radius:
0.125 inches
Second Corner Radius:
0.047 inches
Isthmus Width:
0.062 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic
