رقم الجزء MILR8791

Preformed Packing
وصف

Retainer,packing

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards
رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
milr8791
تجريد:
No
صلاحيه:
وحدة القياس:
NIIN:
006020862
NSN
رقم المخزون الوطني:
5330-00-602-0862 5330006020862
TXT
وصف:
Preformed Packing
INC
INC
رمز اسم العنصر:
04521
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Angle
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-65.0 degrees fahrenheit and 275.0 degrees fahrenheit
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
0.067 inches
MRC:
None.ADVX
Rim Surface Width:
0.034 inches
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
0.670 inches
MRC:
None.ADYU
Peripheral Diameter:
0.735 inches
MRC:
Indicates the type of cut provided.AQZM
Cut Type:
Sectional internal
MRC:
None.CRMK
Angle:
37.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polypropylene
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-8791 military specification single material response
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
22264-g+425 standard (includes industry or association standards, individual manufactureer standards, etc.).

{lang[cimilar]} Preformed Packings

« Packing and Gasket Materials {lang[catalog]}
قارن الآن»
واضح | أخفى