رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Needle Roller Bearing
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.4900 inches and 0.5000 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.8130 inches and 0.8139 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
1.0625 inches
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Ground
MRC:
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.AGZA
Alignment Type:
Rigid
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Lubrication hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp e50100 roller or steel comp e51100 roller or steel comp e52100 roller or steel comp 1090 roller or steel comp 1095 roller
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4620 outer ring or steel comp 4720 outer ring or steel comp 8620 outer ring or steel comp 8720 outer ring or steel comp 1010 outer ring or steel comp 1011 outer ring or steel comp 1012 outer ring or steel comp 1013 outer ring or steel comp 1015 outer ring or steel comp 1016 outer ring or steel comp 1017 outer ring or steel comp 1018 outer ring or steel comp 1019 outer ring or steel comp 1020 outer ring
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard all material responses outer ring
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard all material responses roller or sae j-404 assn standard all material responses roller
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-separable, open end, drawn shell
