رقم الجزء MS21332-2

Snapslide Fastener

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 9.48 and 12.798 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
ms21332-2
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
002862594
NSN
رقم المخزون الوطني:
5325-00-286-2594 5325002862594
TXT
وصف:
Snapslide Fastener
INC
INC
رمز اسم العنصر:
17527
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
0.187 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
0.375 inches
MRC:
The length of the enlarged portion/s/ located on the shank of the item.AAVK
Shoulder Length:
0.105 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
0.250 inches
MRC:
A measurement between specified points of the hole,in distinction from height.AAZQ
Hole Depth:
0.125 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.300 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.078 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.147 inches
MRC:
The length of a straight line which passes through the center of a neck,and terminates at the circumference.ADCL
Neck Diameter:
0.250 inches
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
0.594 inches
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the outside circumference.AGGZ
Shank Outside Diameter:
0.187 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the latch.AGPR
Latch Style:
Flat turned-up end
MRC:
None.AGPS
Latchlength:
1.468 inches
MRC:
None.AGPT
Notch Diameter:
0.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the latch guide.AGPU
Latch Guide Style:
Indented end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the snapslide post.AGPV
Snapslide Post Style:
Post
MRC:
None.AGPW
Head Outside Diameter:
0.375 inches
MRC:
The length of a straight line which passes through the center of the shoulder,and terminates at the outside circumference.AGPX
Shoulder Outside Diameter:
0.220 inches
MRC:
None.AGPY
Post Shoulder Length:
0.100 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the snapslide stud.AGPZ
Snapslide Stud Style:
Stud
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the largest circumference.AGQA
Largest Diameter:
0.375 inches
MRC:
A measurement of the longest dimension of the neck,in distinction from width.AGQB
Neck Length:
0.083 inches
MRC:
A measurement of the longest dimension of the stud,in distinction from width.AGXF
Stud Length:
0.792 inches
MRC:
None.ALBQ
Post Shank Length:
0.137 inches
MRC:
A measurement of the longest dimension of the guide,in distinction from width.AQWP
Guide Length:
0.812 inches
MRC:
None.CHPL
Guide Hole Diameter:
0.189 inches
MRC:
An overall measurement taken at right angles to the length of the latch, in distinction from thickness.CRKM
Latchwidth:
0.562 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy washer
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel latch
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel latch guide
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel post
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel stud
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate

{lang[cimilar]} Snapslide Fasteners

« Fastening Devices {lang[catalog]}
قارن الآن»
واضح | أخفى