رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
Between 1.688 inches and 1.750 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat countersunk
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
Between 0.340 inches and 0.385 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.ABQZ
Internal Drive Style:
Cross recess type 1
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of a nonmachine thread.CRGF
Nonmachine Thread Style:
Gimlet point (type a, ab or ba)
MRC:
The included angle of the countersink.CRSQ
Countersink Angle:
81.0 degrees
MRC:
The length of a straight line which passes through the center of the nonmachine threaded portion,and terminates at the circumference.CTYF
Nonmachine Thread Diameter:
0.190 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1008 or steel comp 1010 or steel comp 1015 or steel comp 1016 or steel comp 1017 or steel comp 1018 or steel comp 1019 or steel comp 1020 or steel comp 1021 or steel comp 1022 or steel comp 1108 or steel comp 1109 or steel comp 1110 or steel comp 1116 or steel comp 1117 or steel comp 1118
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a549 assn standard 1st material response or astm a108 assn standard 2nd material response or astm a576 assn standard 2nd material response or astm a549 assn standard 2nd material response or astm a576 assn standard 3rd material response or astm a549 assn standard 3rd material response or astm a108 assn standard 4th material response or astm 576 assn standard 4th material response or astm a549 assn standard 4th material response or astm a108 assn standard 5th material response or astm a576 assn standard 5th material response or astm a549 assn standard 5th material response or astm a576 assn standard 6th material response or astm a549 assn standard 6th material response or astm a108 assn standard 7th material response or astm a576 assn standard 7th material response or astm a549 assn standard 7th material response or astm a576 assn standard 8th material response or astm a108 assn standard 9th material response or astm a576 assn standard 9th material response or astm a576 assn standard 10th material response or astm a108 assn standard 11th material response or astm a576 assn standard 11th material response or astm a549 assn standard 12th material response or astm a576 assn standard 13th material response or astm a549 assn standard 13th material response or qq-s-637 federal specification 13th material response or astm a576 assn standard 14th material response or astm a549 assn standard 14th material response or qq-s-637 federal specification 14th material response or stm a576 assn standard single material response or qq-s-637 federal specification 15th material response or astm a108 assn standard 16th material response or astm a576 assn standard 16th material response or qq-s-637 federal specification 16th material response or astm a108 assn standard 17th material response or astm a576 assn standard 17th material response or qq-s-637 federal specification 17th material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium and chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416 type 2 cl 3 federal specification single treatment response
