رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
As differentiated by filler of non-asbestos material
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Metal with soft filler
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
150.0 degrees fahrenheit and 500.0 degrees fahrenheit
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 4.172 inches and 4.188 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 3.922 inches and 3.954 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
Between 0.078 inches and 0.110 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Matt
MRC:
The maximum pressure at which an item is rated to operate.CTQW
Maximum Pressure Rating:
200.0 pounds per square inch
MRC:
Indicates the type of product that meets or exceeds the government guidelines for environmentally preferred characteristics.ENAC
Environmental Attribute Code:
Asbestos alternative products
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper case
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Fiber nonasbestos core and asphalt core and rubber butadiene-acrylonitrile class nbr core
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Hh-g-101 federal specification single material response case
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Hh-g-101, type 3 federal specification all material responses core
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Circular
