رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
First leg angle in degrees 88.0 min. 92.0 max.Heat treatment: quenched and tempered
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 0.985 inches and 1.015 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 1.172 inches and 2.202 inches
Second Leg Width:
Between 0.485 inches and 0.515 inches
First Leg Slot Length:
Between 0.278 inches and 0.288 inches
First Leg Slot Width:
Between 0.200 inches and 0.210 inches
Second Leg Distance From Edge To Hole Center Along Width:
Between 0.235 inches and 0.265 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.280 inches
Second Leg Slot Length:
Between 0.340 inches and 0.350 inches
Second Leg Slot Width:
Between 0.260 inches and 0.270 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.056 inches and 0.068 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.056 inches and 0.068 inches
First Leg Width:
Between 0.485 inches and 0.515 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.235 inches and 0.265 inches
First Leg Distance From Edge To Hole Center Along Length:
0.280 inches
First Leg End Radius:
Between 0.485 inches and 0.515 inches
Second Leg End Radius:
Between 0.485 inches and 0.515 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
End radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One slot
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
End radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
One slot
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 410
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5504 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
