رقم الجزء NAS1198-8-38

Solid Rivet

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 11.96 and 16.146 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
nas1198-8-38
تجريد:
Yes - DEMIL/MLI
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
014786899

معلومات الجزء
Tend item elevator trim actuator, screw jack; rivet shall drive cold satisfactorly with full heads free from cracks; uniform quality free from scale, fins, seams clinch or die marks, cold shuts or other injurous effects; heat treat and partially precipitation heat treat at 1650 degrees for 25 min and oil quench; age at 1250 degrees to 1350 degrees for 30 to 90 min to meat shear requirements; air cool; shear strength at room temp 85, 000 psi to 95, 000 as heat treated; 90, 000 psi after driving

NSN
رقم المخزون الوطني:
5320-01-478-6899 5320014786899
TXT
وصف:
Solid Rivet
INC
INC
رمز اسم العنصر:
00861
INC
COM
امتثال:
* ITAR Controlled
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
Between 2.365 inches and 2.385 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Universal
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.040 inches and 0.050 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 0.093 inches and 0.097 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.AAZF
Shank Style:
Countersunk (undrilled)
MRC:
None.AAZG
Head Major Diameter:
Between 0.178 inches and 0.196 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
C130 hercules
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Iron alloy 660
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Amsa286 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35 federal specification single treatment response

{lang[cimilar]} Solid Rivets

« Rivets {lang[catalog]}
قارن الآن»
واضح | أخفى