رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
nas1378a24-ca168
معلومات الجزء
Duct-air, flexible, helix wire supported
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
A measurement of the smallest dimension of the wall,in distinction from length or width.AAGT
Wall Thickness:
0.065 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
6.000 inches both ends
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-65.0 degrees fahrenheit and 275.0 degrees fahrenheit
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
6.300 inches both ends
MRC:
The minimum inside bending radius formed without stressing or deformation of a flexible item.ACKH
Minimum Inside Bending Radius:
6.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft, sof (ac-130h, mc-130h, ec-130e, hc-130)
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
2.000 inches both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Round both ends
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Soft both ends
MRC:
The length of a straight line which passes through the center of the end,and terminates at the inside circumference.CPYG
End Inside Diameter:
6.000 inches both ends
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
4.0 pounds per square inch
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
47.000 inches
MRC:
The nominal force per unit of area exerted inward for which the item is designed.CXMT
External Operating Pressure:
4.5 pounds per square inch
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Fiberglass 1st ply and rubber chloroprene class cr 1st ply
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Fiberglass reinforcing cord
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel reinforcing wire
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Helically wound continous wire supported
