رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Cushion temperature range - 80 degrees to 450 degrees fahrenheit w/short duration excursions to 500 degrees fahrenheit; original dwg name, clamp, loop-cushioned, rectangular
MRC:
Indicates the type of hole/s/ in the tongue.AAAL
Tongue Hole Type:
Round, unthreaded
MRC:
The environmental elements or conditions that the cushioning is designed or protected to resist or withstand satisfactorily.AAAP
Cushioning Environmental Protection:
Heat
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.500 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.204 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.032 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-15s
Center To Center Distance Between Loop And Mounting Hole:
Between 0.903 inches and 0.963 inches
MRC:
A measurement taken at right angles to the length of a loop,in distinction from thickness.AZDA
Loop Width:
Between 0.798 inches and 0.828 inches
MRC:
A measurement of the longest dimension of a loop,in distinction from width.AZDB
Loop Length:
Between 1.048 inches and 1.078 inches
Distance From Loop Center To Tongue End:
Between 1.122 inches and 1.182 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q cushion
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel band
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams3303 assn standard single material response cushion
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5516 assn standard single material response band or ams5510 assn standard single material response band or ams5513 assn standard single material response band
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35 type vi or vii federal specification single treatment response band
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
