رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
nas1712d12-15n
معلومات الجزء
Spec title - clamp, loop-cushioned, rectangular
MRC:
Indicates the type of hole/s/ in the tongue.AAAL
Tongue Hole Type:
Round, unthreaded
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.500 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.204 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.032 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-18 e/f aircraft
Center To Center Distance Between Loop And Mounting Hole:
0.87075 inches
MRC:
A measurement taken at right angles to the length of a loop,in distinction from thickness.AZDA
Loop Width:
Between 0.859 inches and 0.889 inches
MRC:
A measurement of the longest dimension of a loop,in distinction from width.AZDB
Loop Length:
Between 0.9225 inches and 0.9525 inches
Distance From Loop Center To Tongue End:
1.08975 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024 band and aluminum alloy 1230 band
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber chloroprene class cr cushion
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams3209 assn standard single material response cushion
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/5 federal specification all material responses band
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Temp range -- cushion minus 40 degrees to plus 212 degrees f; strap minus 320 degrees to plus 600 degrees f
