رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
nas1712d18-20s
معلومات الجزء
Clamp, loop, cushioned, rectangular
MRC:
Indicates the type of hole/s/ in the tongue.AAAL
Tongue Hole Type:
Round, unthreaded
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.500 inches 1.140 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.204 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.032 inches
Center To Center Distance Between Loop And Mounting Hole:
1.027 inches
MRC:
A measurement taken at right angles to the length of a loop,in distinction from thickness.AZDA
Loop Width:
Between 1.110 inches and 1.140 inches
MRC:
A measurement of the longest dimension of a loop,in distinction from width.AZDB
Loop Length:
Between 1.235 inches and 1.265 inches
Distance From Loop Center To Tongue End:
1.246 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Cushion tep range m80.0 degrees f to p212.0 degrees f; band temp range m320.0 degrees f to p200.0 degrees f
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy band
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q cushion
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 3303 assn standard single material response cushion
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams-qq-a-250/5 condition t4 or t42 assn standard single material response band
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
