رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Plate Nut Spacer
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.102 inches and 0.108 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA
Nut Style:
Plate nut spacer
MRC:
A measurement of the longest dimension of the nut,in distinction from width.ACVN
Nut Length:
Between 0.954 inches and 0.984 inches
MRC:
The length of a straight line which passes through the center of a thru-hole,and terminates at the circumference.ADAZ
Thru-hole Diameter:
Between 0.240 inches and 0.250 inches
MRC:
A measurement of the smallest dimension of a plate,in distinction from length or width.ADEB
Plate Thickness:
0.090 inches
MRC:
A measurement taken at right angles to the length of a plate,in distinction from thickness.ADEC
Plate Width:
Between 0.440 inches and 0.470 inches
MRC:
The means by which the nut is mounted.ADFP
Nut Mounting Provision:
Countersunk holes
MRC:
The side of the plate that the countersink or welding projections are located.ADFR
Mounting Provision Location:
Nut projection side
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
2 holes
Distance From Aperture Center To Mounting Hole Center:
Between 0.341 inches and 0.347 inches
MRC:
A measurement of the center to center distance between the mounting holes along the length.ADFY
Center To Center Distance Between Mounting Holes Along Length:
Between 0.686 inches and 0.690 inches
MRC:
The included angle of the mounting hole countersink.CSSM
Mounting Hole Countersink Angle:
100.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 301 or steel comp 302 or steel comp 304 or steel comp 316 or stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-5059 military specification 1st material response or mil-s-6721 federal specification 2nd material response
