رقم الجزء NP5018070

Groove Pulley

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 763.52 and 1030.752 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
np5018070
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
011008078
NSN
رقم المخزون الوطني:
3020-01-100-8078 3020011008078
TXT
وصف:
Groove Pulley
INC
INC
رمز اسم العنصر:
08109
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
0.363 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.343 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
10.610 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.500 inches
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
3.374 inches
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
5/16-18
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
1.260 inches
MRC:
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.AGGP
Drilled Hole Diameter:
0.350 inches
MRC:
The angle of the v groove,expressed in degrees.AGGS
V Groove Angle In Deg:
42.0
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
10.260 inches
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
3
MRC:
The length of a straight line which passes through the center of the largest portion of a tapered bore,and terminates at the circumference.ANAL
Taper Bore Major Diameter:
2.805 inches
MRC:
The length of a straight line which passes through the center of the smallest portion of a tapered bore,and terminates at the circumference.ANAM
Taper Bore Minor Diameter:
2.735 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
1.138 inches
MRC:
The physical configuration of the item.ARJD
Design Form:
Spoked
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Tapered
MRC:
An indication of whether or not bearings are included.AWJQ
Bearings:
Not included
MRC:
Indicates the location of the taper major diameter.AWPJ
Taper Major Diameter Location:
Bb end
MRC:
The number of grooves provided.AXHQ
Groove Quantity:
2
MRC:
An indication of whether or not a counterbore feature is included.AXND
Counterbore Feature:
Not included
MRC:
Indicates the location of the hole on the item.BFYT
Hole Location:
Hub face
MRC:
An indication of whether or not a keying facility is included.BSGG
Keying Facility:
Not included
MRC:
The means by which the item is secured.BSNP
Securing Method:
Drilled hole and threaded hole
MRC:
An indication of whether or not a split hub feature is included.BSYG
Split Hub Feature:
Not included
MRC:
An indication of the relationship between the webbing or spokes and the centerline of the face.BXSH
Web/spoke Relationship To Face Centerline:
Offset
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Not included
MRC:
An indication of whether or not an integral cooling vane(s) is included.BXSK
Integral Cooling Vane:
Not included
MRC:
The physical configuration of the groove.BXSM
Groove Shape:
V
MRC:
The alpha and/or numeric section designation of the standard v-belt for which designed.BXSN
Standard V-belt Section Designation For Which Designed:
3v
MRC:
An indication of whether or not a bore feature is included.BYDS
Bore Feature:
Included
MRC:
An indication of the characteristic of the protruding hub.BYDZ
Protruding Hub Characteristic:
Plain
MRC:
Indicates the location for securing the item.BYFF
Securing Location:
Aa end or bb end
MRC:
None.BYZD
Hub End Outside Diameter And Location:
4.335 inches aa end and 4.230 inches bb end
MRC:
None.BYZF
Distance From Outside Flange/rim To Hub End And Location:
0.415 inches aa end and 0.236 inches bb end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Webbed or spoked

{lang[cimilar]} Groove Pulleies

« Gears, Pulleys, Sprockets and Transmission Chain {lang[catalog]}
قارن الآن»
واضح | أخفى