رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Cbored id, 0.875 in. Dia, 0.250 in deep
TXT
وصف:
Bearing Unit Housing
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
0.260 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.108 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.169 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.7500 inches and 0.7600 inches
MRC:
A measurement of the smallest dimension of a base,in distinction from length or width.ACYB
Base Thickness:
Between 0.865 inches and 0.885 inches
MRC:
A measurement of the center to center distance between the mounting holes along the width.ADFX
Center To Center Distance Between Mounting Holes Along Width:
Between 1.185 inches and 1.189 inches
Housing Height:
1.175 inches
MRC:
A measurement of the longest dimension of the housing,in distinction from width.AFWD
Housing Length:
Between 0.370 inches and 0.380 inches
MRC:
A measurement taken at right angles to the length of a housing,in distinction from thickness.AFWE
Housing Width:
Between 1.615 inches and 1.635 inches
MRC:
A measurement of the longest dimension of the base,in distinction from width.AGNF
Base Length:
Between 0.370 inches and 0.380 inches
MRC:
Indicates the type of shaft end provided.ANJS
Shaft End Type:
Open
Height From Bottom Of Base To Bore Centerline:
Between 0.550 inches and 0.552 inches
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Round, unthreaded, counterbored
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
46-b-5, fscm 34228 mfr ref single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Pillow block, solid
