رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The number of threads per inch on the mounting.AAMQ
Mounting Threads Per Inch:
32
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
9.563 inches
MRC:
The length of a straight line which passes through the center of a bushing,and terminates at the circumference.ABKH
Bushing Diameter:
0.375 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.875 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.625 inches
MRC:
A measurement of the longest dimension of a bushing,in distinction from width.ABXD
Bushing Length:
0.375 inches
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
7.000 inches
MRC:
The means of attaching the item.ADJH
Mounting Method:
Bushing
MRC:
The number of indexed positions to which the switch actuator may be moved.AFTM
Switch Position Quantity:
11
MRC:
The length of a straight line which passes through the center of a shaft cross hole, and terminates at the circumference.AKJK
Err Default:
Err default
MRC:
The length of a straight line which passes through the center of a shaft cross hole, and terminates at the circumference.AKJK
Shaft Cross Hole Diameter:
0.064 inches
MRC:
An indication of whether or not a locking device is included.AMDA
Locking Device:
Not included
MRC:
The angular rotation that the item moves between positions,expressed in degrees.APDM
Positioning Increments In Deg:
30.0
MRC:
An indication of whether or not the stop is adjustable.APDN
Stop Adjustability:
Adjustable
MRC:
An indication of the adjustment range of the stop.APDP
Stop Adjustment Range:
+2.0/+11.0
MRC:
The geometric configuration of the shaft end,when viewed axially,and its location.APDQ
Shaft Cross-sectional Shape And Location:
Round front end
MRC:
A measurement,such as length,width,diameter,and the like.APDR
Size:
0.250 in. Diameter front end
MRC:
The distance from the end of the shaft to the mounting surface.APDS
Distance From Shaft End To Mounting Surface:
2.250 inches
