رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Rounded brass, tin plated cap end with 0.125 diameter hole drilled one side only near flat end in center, 1st end; squared (rounded edges) brass, tin plated cap end with 0.125 diameter hole drilled one side only near flat end in center, 2nd end
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
1.000 inches single conductor
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Mx stage 1
MRC:
The center to center distance between the terminal holes.AGTK
Center To Center Distance Between Terminal Holes:
Between 45.250 inches and 45.750 inches
MRC:
Indicates the type of facility provided on the device for attaching to another item.AKRZ
Termination Type:
Terminal cap tube both ends single conductor
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the lead.AXBQ
Leadlength:
Between 46.340 inches and 46.840 inches
MRC:
The number of strands per conductor.BLNZ
Strand Quantity Per Conductor:
480 single conductor
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.CWWG
Height:
0.253 inches and 0.293 inches single conductor
MRC:
The fabricated form of the conductor.CXCW
Conductor Form:
Braid, flat single conductor
MRC:
The designation used to describe the round stranded or round solid conductor size.CXDC
Round Conductor Size:
3 awg single conductor
MRC:
The american wire gage size of the individual strands of wire used in each stranded conductor.CXDG
Strand Awg Size Per Conductor:
30 single conductor
MRC:
The geometric configuration of the conductor when viewed in cross-section.CXDM
Conductor Cross-sectional Shape:
Rectangular single conductor
MRC:
Designates the size of the mounting aperture provided in the terminal lug.CXFM
Terminal Lug Aperture Size:
0.406 inches both ends single conductor
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the terminal lug.CXFY
Terminal Lug Style:
Straight w/mounting hole both ends single conductor
MRC:
The pulling force which the item is capable of withstanding without any permanent deformation or damage.CXHH
Lead Pull Strength:
75.0 pounds
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper core conductor single conductor
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q 1st position sleeve single conductor
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-b-575r30t0562 federal specification single material response core conductor single conductor
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Stw4-6337 assn standard single material response 1st position sleeve single conductor
MRC:
An indication of the nuclear hardness criticality of the item.NHCF
Nuclear Hardness Critical Feature:
Hardened
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Tin core coating single conductor
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Terminal to terminal resistance shall be 0.005 ohm
