رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Socket Wrench Spanner Attachment
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aim-120a
MRC:
A numeric value which indicates the size of the drive surface.ATNC
Drive Surface Size:
0.250 inches single end
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 45.0 rockwell c and 50.0 rockwell c
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
The wrench is fabricated from a 2.0 inch length of 0.5 inch diameter steel stock; the tool is initially formed by taking a centered flat cut 0.422 deep by 1.5 inch long measured from length wise center of stock; this leaves an upright measuring of 0.25 wide by 0.422inch high at each end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Nickel
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
The wrench point of tool is formed by removing 0.13 inch from top of one upright; material is removed from upright for wrench point by making a hexcut measuring 0.139 p/m 0.003 inch; hex wrench point centerline to be on original centerline of stock; a 1/4 inch power driver 0.75 inch long is welded to remaining upright; centerline of hex driver to be on centerline of wrenchpoint; length of tool to be 2.75 inches
