رقم الجزء PL3Y210N

Bearing Unit Housing

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 68.84 and 92.934 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
pl3y210n
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
009060937
NSN
رقم المخزون الوطني:
3130-00-906-0937 3130009060937
TXT
وصف:
Bearing Unit Housing
INC
INC
رمز اسم العنصر:
30559
MRC:
A measurement taken at right angles to the length of the mounting slot,in distinction from thickness.ABTD
Mounting Slot Width:
0.4380 inches
MRC:
A measurement of the longest dimension of the mounting slot,in distinction from width.ABVG
Mounting Slot Length:
0.7810 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.6250 inches
MRC:
A measurement of the smallest dimension of a base,in distinction from length or width.ACYB
Base Thickness:
0.5000 inches
MRC:
A measurement of the center to center distance between the mounting holes along the width.ADFX
Center To Center Distance Between Mounting Holes Along Width:
3.6562 inches
MRC:
None.AFWC
Housing Height:
2.1560 inches
MRC:
A measurement taken at right angles to the length of a housing,in distinction from thickness.AFWE
Housing Width:
5.0625 inches
MRC:
Indicates the type of fitting used to lubricate the item.AGKL
Lubrication Fitting Type:
Hydraulic
MRC:
A measurement of the longest dimension of the base,in distinction from width.AGNF
Base Length:
1.5000 inches
MRC:
Indicates the type of shaft end provided.ANJS
Shaft End Type:
Open
MRC:
None.ANKP
Height From Bottom Of Base To Bore Centerline:
1.0630 inches
MRC:
The angle of the lubrication fitting from the horizontal centerline of the item.CWGR
Lubrication Fitting Angle From Horizontal Centerline:
30.0 degrees
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Slotted
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Iron cast
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Pillow block, solid

{lang[cimilar]} Bearing Unit Housings

« Mounted Bearings {lang[catalog]}
قارن الآن»
واضح | أخفى