رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
pl501e398bcpc10
وحدة القياس:
* special requirements. EA
معلومات الجزء
Between pitch diameter: 1.200 in. ; 1 keying facility provided; keying facility width: 0.311 in. And 0.313 in. ; keying facility length: 1.750 in. ; boreshaft also splined
TXT
وصف:
Rigid Shaft Coupling
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
1.1330 inches second end and 1.1380 inches second end
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
1.1330 inches and 1.1380 inches second end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
1.2870 inches second end and 1.3020 inches second end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
1.2870 inches and 1.3020 inches second end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.500 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
24 first end
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABVK
Thread Size Designator:
3/8-16
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
1.3735 inches first end and 1.3740 inches first end
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
1.3735 inches and 1.3740 inches first end
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
2.250 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
1.7500 inches first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight first end
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.000 first end
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.7500 inches first end
MRC:
Indicates the type of spline provided.AXYS
Spline Type:
Involute first end
MRC:
The means by which the item is secured.BSNP
Securing Method:
Threaded hole
MRC:
The number of threaded holes provided.BSNQ
Threaded Hole Quantity:
1
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Keyway
MRC:
The chemical compound or mechanical mixture properties of which the body is fabricated.CQRG
Body Material:
Steel comp 4140
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624, fs4140 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain sleeve
