رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Blue finish; lens material pyrex; min burst pressure 400 psi at 72 degrees f; concentric reflector grooves
TXT
وصف:
Liquid Sight Indicator
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a single end
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand single end
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.044 inches and 0.164 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
2 single end
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.070 inches single end
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
1.630 inches
MRC:
The length of a straight line which passes through the center of the tube for which designed,and terminates at the outside circumference.ASPP
Tube Outside Diameter For Which Designed:
1.000 inches single end
MRC:
The maximum value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ATQZ
Maximum Tempurature Rating:
325.0 degrees fahrenheit
MRC:
Indicates the type of end connection.AWZY
End Connection Type:
Threaded external, gasket seal single end
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12 single end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.312 inches single end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Oil
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Bulls eye
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Un single end
