رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Terminal universal wiring subbase
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
2.219 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.ABKR
Center To Center Distance Between Mounting Facilities Parallel To Width:
2.281 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
4.969 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
4.969 inches
MRC:
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the height.AEBW
Center To Center Distance Between Mounting Facilities Parallel To Height:
2.500 inches
MRC:
A designation of the standard mounting facility arrangement provided.AESL
Standard Mounting Pattern Designator:
4 point-rectangular
MRC:
A numeric designation which identifies the nominal diameter of the entrance/s/ provided on the item.AFEP
Entrance Diameter Numeric Designator:
0.875
MRC:
The length of a straight line which passes through the center of the cable entrance,and terminates at the circumference.AFQJ
Cable Entrance Diameter:
0.875 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Quick-mount wiring subbase for all 7800 series relay modules and s7830 expanded anunciator
MRC:
The measured weight of an item unencumbered by packaging or packing material.AWJN
Unpackaged Unit Weight:
1.188 pounds
MRC:
The means of attaching the item.AXGY
Mounting Method:
Slot
MRC:
The number of grounding foot terminals provided.BGJJ
Err Default:
Err default
MRC:
Indicates the type and number of terminals for providing electrical connection.CCFF
Terminal Type And Quantity:
22 screw
MRC:
Indicates the type and number of entrances provided.CPLF
Entrance Type And Quantity:
8 single knockout
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Burner/wall mount; nema 1 enclosure; electrical access slot covers provided; uses 4 number 6 mounting screws; 2 knockouts for half inch conduit at each end and 3 down middle of box
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Square, flush mounting
