رقم الجزء QPL11276

Cylinder Sleeve

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 196.72 and 265.572 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
qpl11276
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
000711842

معلومات الجزء
Bottom side chamfered 75 degrees by 3/16 in. W

NSN
رقم المخزون الوطني:
2815-00-071-1842 2815000711842
TXT
وصف:
Cylinder Sleeve
INC
INC
رمز اسم العنصر:
16756
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.189 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
12.812 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.500 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
5.219 inches
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
8.125 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
5.781 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the outside circumference.AHTC
Flange Outside Diameter:
6.187 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Dry
MRC:
An indication of whether or not a valve recess(es) is included.BPPS
Valve Recess:
Not included
MRC:
An indication of whether or not a top inside chamfer is included.BPPT
Top Inside Chamfer:
Not included
MRC:
An indication of whether or not a bottom inside chamfer is included.BPPW
Bottom Inside Chamfer:
Not included
MRC:
An indication of whether or not a top intake port is included.BPPX
Top Intake Port:
Not included
MRC:
None.BPPY
Largest Outside Diameter Under Flange:
5.844 inches
MRC:
None.BPPZ
Largest Outside Diameter Width Under Flange:
5.875 inches
MRC:
None.BPQB
Grooved Portion Outside Diameter:
5.750 inches
MRC:
None.BPQC
Grooved Portion Width:
2.250 inches
MRC:
None.BQBD
Groove Radius Depth:
0.091 inches
MRC:
An indication of whether or not an intake hole(s) is included.BQBF
Intake Hole:
Not included
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Wet, relieved, three seal grooves

{lang[cimilar]} Cylinder Sleeves

« Diesel Engines and Components {lang[catalog]}
قارن الآن»
واضح | أخفى